AMT1

New Product:  Thermbond Formula 28-S coating for ceramic fibre linings

Stellar Materials, manufacturer of Thermbond Refractories is pleased to announce a new Formula product called Thermbond Formula 28-S.

Formula 28-S is a coating material that is mixed with Thermbond's Formula Activator. The dry material ships in a 17kg pail and uses two jugs of activator. The coating provides non wetting properties against molten aluminum and protects surfaces in furnaces against slags and ash build up. Formula 28-S has a long working time and sets under heat during furnace start up at roughly 93C.

Formula 28-S can be used in any industry with ceramic fiber lined furnaces to rigidize the fiber surface and protect the fiber from high wind velocities and abrasion from particle load in the furnace. It can also convert a conventional refractory surface into a non-wetting surface and protect a surface from slag infiltration. The sprayed layer has a thickness between 100 and 300 microns.

Formula 28-S is scheduled to be installed in an Ethanol plant in the near future. The material will be applied with a texture sprayer to seal the cracks around the burners, providing an extra layer of protection to the refractory. This customer is very excited about the new product and the benefits it will provide them. Formula 28-S is superior to the current coating material they use, thanks to the additional protection of the refractory, the dry out method, the consistency of the material and the bonding capabilities.

Stellar Materials, manufacturer of Thermbond Refractories is pleased to announce a new Formula product called Formula 28-S. Formula 28-S is a coating material that is mixed with Thermbond's Formula Activator. The dry material ships in a 17kg pail and uses two jugs of activator. The coating provides non wetting properties against molten aluminum and protects surfaces in furnaces against slags and ash build up.

Please share with your customers and distributors this new and innovative coating material. Please contact me if you need to order material.

Contact: John Pulbrook
e-mail: john.pulbrook@bigpond.com Mobile: 0450 695691

  Next -->